For the residents who live in rural-areas, limited water-availability is a very common problem. Therefore, many people install a water tank on the roof of the building. The water, stored in a water ...

Description of water sensor: in most houses, water is first stored in an underground tank (UGT) and from there it is pumped up to the overhead tank (OHT) located on the roof. People generally switch ...

Most of the homes in the area where [Raikut] lives have tanks on the roof to hold water. Each is filled from a well using a pump, with gravity serving as a way to pressurize the home’s water supply.

An RV is somewhat self-sufficient. Your RV has an on-board fresh water supply, as well as holding tanks to capture the gray water from the sinks and black water from the toilet. It’s important for the ...

The Rural Development Department successfully installed an automatic water level controller in an overhead water tank in a panchayat in the district. The device and sensors installed in the tank ...

[Stephen] has a basement that depends on a sump pump. What that means is if the pump fails or the power goes out, the basement floods—which is rather undesirable. Not wanting to rely on a single point ...

Locating the interface between the high solids region of a settlement tank or clarifier and the relatively lower solids region above it is a constant requirement in the operation of sewage, wastewater ...

Configured with a float, Macro Sensors HSIR Series LVDT Linear Position Transmitters are serving as level sensors to measure liquid level changes from a few inches to several feet in gauging tank ...